Click on the image to check the artwork
FD-2A electric and high-pressure polyurethane spray machine
Application:
Spray area:
wall,roof,refrigeratory, cabin,car,refrigerator car,tank,industry antiseptic
Injection area:
solar water heater,insulation of water tank, cabin,security door,refrigerator,pipe
Highway construction,sound insulation for wall.
Advantage:
1.Small size, light weight, low failure rate, simple operation, easy movement
2.Without large air compressor,Bring convenience to the construction
3.Multi-leakage protection system
Guarantee and after-sale service
1.18 months guarantee for whole machine except artificial damage.
2.24 hours technical support by e-mail, skype or telephone.
3.Use-friendly English manual and videos.
Guarantee and after-sale service
1.18 months guarantee for whole machine except artificial damage.
2.24 hours technical support by e-mail, skype or telephone.
3.Use-friendly English manual and videos.
Standard Technical Parameters
| The ratio of raw material 1:1 | Max heating hose length 75m |
Max working pressure 23Mpa |
Heating hose max power 3500W |
Max fluid temperature 80ºC |
Voltage 220V/380V |
Max output 9 kg/min |
Clean mode Self-clean by air |
Heater power 3000W×2 |
Pneumatic source 0.3Mpa 1m³/min |
Standard Configuration
| Mainframe 1 set | Self-cleaning spray gun 1 set |
Transfer pump 2 sets |
Heating hose 15m |
Transfer pump hose 2.5m |
Gun hose 1.5m |
Spare parts and Tools 1 set |
English user manual 1 set |
Shipping Parameters
| Body size (L×W×H)820×900×1150mm |
Packing size (L×W×H) 400×560×1440mm |
Gross weight 210kg |